Board Bring-Up Checklist: Power On a New PCB Without Frying It

LA New Product Development Team · 1:41 · Published October 18, 2026

About this video

Board bring-up is the first power-on and step-by-step validation of a new PCB assembly: you prove each circuit works, with only enough firmware to exercise the hardware, before an enclosure or a beta depends on the boards.

In this 90 second explainer:

- Plan bring-up in the PCB design review: test points, a debug header and a written plan

- The rule: nothing gets power until it passes the unpowered checks

- The checklist: label and log, inspect before power, measure each rail to ground, first power from a current limited supply, probe the clock and reset, flash a tiny firmware image and blink an LED, then bring up one block at a time

- Handle every board as ESD sensitive

- The habit: write down every bodge wire and part swap, and plan for more than one spin

Read the full board bring-up checklist: https://lanpdt.com/board-bring-up/

Have a product to build?

We handle concept design, engineering, prototyping and manufacturing hand-off in house, the same process shown in these videos.

Request a quote

Why we publish these videos

Almost everything on this channel was produced alongside a real client programme rather than as marketing filler. Some clips are product animations built to explain a mechanism to a licensee or a retail buyer, some document how a prototype was machined, printed or assembled, and some are episodes of our podcast covering developments in product design and manufacturing.

We publish them because most of the questions inventors ask are easier to answer by showing than by describing. Seeing how a part comes off a printer, how an overmoulded grip is cast, or how a concept is judged in a design review tends to settle expectations about cost and schedule far faster than a written explanation.

LA New Product Development Team is a US design, engineering and prototyping group based in Ruston, Louisiana. We take hardware products from an initial idea through research, industrial design, mechanical and electronic engineering, prototyping and a manufacturing hand-off, and every video here comes out of that work.