Jan 2026 FDA Wellness Update: What Wearables Can Show Now
LA New Product Development Team · 1:34 · Published October 24, 2026
About this video
FDA's General Wellness guidance, reissued on 6 January 2026, lets non-invasive health wearables show validated values like blood pressure, SpO2 or HRV as wellness trends and baselines without being regulated as a medical device, as long as the product's claims, alerts and outputs stay inside the policy. Here is where the new line sits and how to prototype an AI health wearable on the right side of it.
Full guide: https://lanpdt.com/fda-general-wellness-guidance-2026-ai-wearables/
This video explains public FDA guidance for product planning. It is not legal or regulatory advice.
What you'll learn:
- What changed: FDA's 6 Jan 2026 General Wellness: Policy for Low Risk Devices adds a section on non-invasive sensing. Optical (PPG) and motion-sensor wearables may show validated values, ranges, trends and baselines for sleep, activity, stress and recovery (FDA).
- Where the line is: no disease names or diagnostic thresholds, no alerts that require clinical action, no treatment guidance, no medical grade or clinical equivalence claims, and nothing invasive. A microneedle glucose wearable is not a low risk wellness product (FDA Illustrative Example 8).
- The allowed nudge: a "see a professional" notification is OK if it names no disease, gives no threshold and does not call the result abnormal. FDA's town hall example: "Your resting heart rate was high over the past few days. You should check with your doctor if this is an unexpected result."
- Real-world proof: FDA's 14 July 2025 warning letter to WHOOP over its Blood Pressure Insights feature was closed out on 17 June 2026 after WHOOP changed the feature and its labeling (FDA). Oura announced a wellness blood pressure trends feature that does not show systolic and diastolic readings (MedTech Dive, 28 May 2026).
Read more on this topic
Have a product to build?
We handle concept design, engineering, prototyping and manufacturing hand-off in house, the same process shown in these videos.
Request a quoteWhy we publish these videos
Almost everything on this channel was produced alongside a real client programme rather than as marketing filler. Some clips are product animations built to explain a mechanism to a licensee or a retail buyer, some document how a prototype was machined, printed or assembled, and some are episodes of our podcast covering developments in product design and manufacturing.
We publish them because most of the questions inventors ask are easier to answer by showing than by describing. Seeing how a part comes off a printer, how an overmoulded grip is cast, or how a concept is judged in a design review tends to settle expectations about cost and schedule far faster than a written explanation.
LA New Product Development Team is a US design, engineering and prototyping group based in Ruston, Louisiana. We take hardware products from an initial idea through research, industrial design, mechanical and electronic engineering, prototyping and a manufacturing hand-off, and every video here comes out of that work.