Shipping Lithium Batteries in 2026: The New 30% Rule for Prototypes

LA New Product Development Team · 1:31 · Published October 26, 2026

About this video

Shipping lithium batteries in 2026? Since 1 January 2026, IATA's guidance says lithium ion batteries packed with equipment must fly at 30% state of charge or less. Here is what that means for prototypes and beta units.

Full guide: https://lanpdt.com/shipping-lithium-batteries-2026-prototypes/

What changed in 2026:

- Packed with the device (PI 966): 30% state of charge or less is now a must, not a should. Section II cells of 2.7 Wh or less remain a should.

- Installed in the device (PI 967): 30% state of charge, or 25% on the battery gauge, is strongly recommended, not mandatory.

- Batteries shipped alone (PI 965): already limited to 30% state of charge, and forbidden on passenger aircraft.

- Prototype cells not tested to UN 38.3: not allowed on passenger aircraft. By air, cargo aircraft only, with approval from the State of Origin and State of Operator (Special Provision A88).

- In the US, 49 CFR 173.185(e) adds Packing Group I outer packaging and Associate Administrator approval for cargo aircraft. The US proposal to extend the 30% rule (PHMSA HM-215R) is still a proposed rule.

Have a product to build?

We handle concept design, engineering, prototyping and manufacturing hand-off in house, the same process shown in these videos.

Request a quote

Why we publish these videos

Almost everything on this channel was produced alongside a real client programme rather than as marketing filler. Some clips are product animations built to explain a mechanism to a licensee or a retail buyer, some document how a prototype was machined, printed or assembled, and some are episodes of our podcast covering developments in product design and manufacturing.

We publish them because most of the questions inventors ask are easier to answer by showing than by describing. Seeing how a part comes off a printer, how an overmoulded grip is cast, or how a concept is judged in a design review tends to settle expectations about cost and schedule far faster than a written explanation.

LA New Product Development Team is a US design, engineering and prototyping group based in Ruston, Louisiana. We take hardware products from an initial idea through research, industrial design, mechanical and electronic engineering, prototyping and a manufacturing hand-off, and every video here comes out of that work.