The AI Act Deadline That Did Not Move
LA New Product Development Team · 1:14 · Published October 29, 2026
About this video
EU AI Act 2026 for AI hardware: the AI Omnibus moved the high-risk deadlines, but the Article 50 transparency rule has applied since 2 August 2026. If your product talks with people, it must tell them it is AI. Here is what changed, straight from the European Commission, and what to build into your AI hardware prototype now.
Full guide: https://lanpdt.com/eu-ai-act-2026-ai-hardware-prototype/
What you will learn:
1. The AI Omnibus, Regulation (EU) 2026/1744, entered into force on 27 July 2026 (final law, not a proposal). High-risk rules now apply from 2 December 2027 for stand-alone systems listed in Annex III, and from 2 August 2028 for AI embedded in regulated products such as machinery, toys and lifts (Annex I).
2. Article 50 did not move. Since 2 August 2026, AI that interacts directly with people must tell them they are interacting with AI, at the latest at the first interaction, unless that is obvious. The Commission's guidelines list voice assistants, robots and cobots, AI companions and robotic companion pets as examples.
3. Generative AI outputs (images, audio, video, text) need machine-readable marks. Systems placed on the market before 2 August 2026 have until 2 December 2026 for the marking obligation only.
4. What to build in now: a tested AI disclosure on the first prototype users touch, safety stops and battery protection that never depend on the AI model, a one-page intended-purpose note, and logs from every alpha and beta test.
This is product planning information, not legal or regulatory advice.
Read more on this topic
Have a product to build?
We handle concept design, engineering, prototyping and manufacturing hand-off in house, the same process shown in these videos.
Request a quoteWhy we publish these videos
Almost everything on this channel was produced alongside a real client programme rather than as marketing filler. Some clips are product animations built to explain a mechanism to a licensee or a retail buyer, some document how a prototype was machined, printed or assembled, and some are episodes of our podcast covering developments in product design and manufacturing.
We publish them because most of the questions inventors ask are easier to answer by showing than by describing. Seeing how a part comes off a printer, how an overmoulded grip is cast, or how a concept is judged in a design review tends to settle expectations about cost and schedule far faster than a written explanation.
LA New Product Development Team is a US design, engineering and prototyping group based in Ruston, Louisiana. We take hardware products from an initial idea through research, industrial design, mechanical and electronic engineering, prototyping and a manufacturing hand-off, and every video here comes out of that work.